Find a trade · Mid & East Antrim

Plasterer in Mid & East Antrim, Northern Ireland

1 verified plasterer listed across Mid and East Antrim Borough Council.

Post a plasterer job — freeAll NI plasterers

Looking for a plasterer across Mid & East Antrim? NI Trades is an introduction service that matches Northern Ireland homeowners with plasterers who have passed our application-stage checks. Mid & East Antrim is one of 11 NI council districts; tradespeople choose the councils they cover, so picking a council means you reach every plasterer who works anywhere in this district. Post your job in two minutes — only profiles of plasterers interested in your specific job are revealed, and your contact details stay private until you choose who to talk to. Insurance, credentials and references are checked at application stage only — please verify current insurance and credentials directly with any tradesperson before work begins or any money is paid.

No reviews for plasterers yet
Reviews on NI Trades are tied to verified jobs. As soon as a homeowner hires a plasterer through the platform and the job completes, ratings will start appearing here.
How it works
1
1
Post your job
Describe what needs doing and confirm your job is in Mid & East Antrim. Tradespeople see only the job — never your contact details.
2
2
Get notified of interest
When a vetted tradesperson expresses interest you get a notification. Maximum 3 per job — no spam.
3
3
Choose and connect
Only profiles of tradespeople interested in your specific job are revealed. You decide who to contact.

Common services

  • Skim coat over existing plaster
  • Dry lining & plasterboard fitting
  • Coving & cornice installation
  • External sand & cement render
  • Insulated external render systems
  • Artex removal & replacement
  • Patch repairs after pipe work
  • Pebble dash application
  • Venetian & decorative plaster
  • Thistle bonding coat
  • Soundproofing systems
  • Stud wall construction

What to ask before hiring

  • How long before the walls are ready to paint?
  • Do you supply materials or should I source them?
  • Can you match the existing texture or finish?
  • Are you fully insured?
  • Will you protect floors and fixtures during the work?
  • Can I see examples of your work?
  • What brand of plaster do you use?

Typical costs in Northern Ireland

Job typeTypical priceNotes
Hourly rate£30–£50/hrDay rate typically £150–£280
Single room skim (ceiling & walls)£300–£700Average 3m × 4m room
Full house skim (3-bed)£2,500–£5,000All rooms inc. ceilings
Dry lining (per m²)£15–£30/m²Plasterboard fixed and skimmed
External render (per m²)£25–£50/m²Sand and cement, exc. scaffolding
Insulated render system (per m²)£80–£150/m²EWI, full system supply and fix
Coving installation (per m)£10–£25/mIncluding adhesive and finishing
Artex removal (per room)£200–£600Testing for asbestos first recommended

Qualifications & accreditations to look for

City & Guilds Plastering Level 2/3
Core plastering qualification
NVQ Level 2/3 Plastering
National vocational qualification
CSCS Skilled Worker Card
Required on most commercial sites
EWI Training Certificate
External wall insulation system installer
Public Liability Insurance
Minimum £1m — required on NI Trades

Frequently asked questions

Does artex contain asbestos?
Artex applied before 1984 has a higher chance of containing chrysotile (white) asbestos. However, the material is only dangerous if disturbed or sanded. Before any artex removal, have a sample tested by an accredited laboratory (cost approximately £30–£50). If asbestos is confirmed, a licensed removal contractor must be used, not a general plasterer.
What is the difference between bonding and skim?
Bonding coat is a thick undercoat applied to surfaces that need building up — such as block walls, repairs after pipe chases, or surfaces that won't take skim directly. Skim coat is the thin finishing coat (2–3mm) applied over bonding or existing plaster to create a smooth surface. Most walls that have already been plastered just need a skim.
Can I paint straight after skimming?
No. Fresh plaster is alkaline and porous. You should apply a mist coat (highly diluted emulsion — approximately 70% paint, 30% water) once the plaster is dry but before it has fully carbonated (usually 1–2 weeks). The mist coat seals the surface. Full painting should then wait another 4–6 weeks until the plaster is completely dry.
What is insulated render and is it worth it?
External Wall Insulation (EWI) is a system that fixes insulation boards to the exterior of your home and then renders over them. It can reduce heat loss by up to 45% in solid-wall properties, significantly cutting heating bills. In Northern Ireland's climate it also provides excellent weather resistance. Government grants may be available through the NI Boiler Replacement Scheme and NISEP energy efficiency schemes.
Important
Allow fresh plaster to dry fully before painting — this typically takes 4–6 weeks depending on room ventilation. Painting too early traps moisture and causes flaking, bubbling and poor coverage.
Hiring a plasterer in Mid & East Antrim

Mid & East Antrim is part of our Northern Ireland directory. NI Trades is an introduction service — we list tradespeople who have passed our application-stage checks, but we are not party to any contract you enter into with a tradesperson. See how we vet tradespeople for the full vetting methodology, or browse all trade categories.

Plasterers in Mid & East Antrim towns4 towns
Plasterer in BallymenaPlasterer in CarrickfergusPlasterer in LarnePlasterer in Portglenone
Plasterers in other NI council districts10 councils
Plasterer in Antrim & NewtownabbeyPlasterer in Ards & North DownPlasterer in Armagh, Banbridge & CraigavonPlasterer in BelfastPlasterer in Causeway Coast & GlensPlasterer in Derry & StrabanePlasterer in Fermanagh & OmaghPlasterer in Lisburn & CastlereaghPlasterer in Mid UlsterPlasterer in Newry, Mourne & Down